dol sensors iDOL 65 Panduan Pengguna Teknis - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna Teknis untuk Catu Daya dol sensors iDOL 65. dol sensors iDOL 65 8 halaman.
Juga untuk dol sensors iDOL 65: Manual (12 halaman), Panduan Pengguna Teknis (4 halaman)
Halaman Cetak6 Registration of location and calibration of camera
As a part of the installation it must be registered where each of the iDOL 65 cameras are mounted.
Note that the camera must be connected to power and the network and must be online during this
process.
6.1 Login
Use the browser on you mobile phone and log into the DOL Omni Cloud as 'Configurator'.
• Open the browser and find https://omni.dol-sensors.com
• Enter user name and password
6.2 Register the placement of the camera
• Search for the iDOL 65 you want to register.
• When the iDOL 65 for registration is selected, enter the DeviceId (DEVICE ID) found on the label inside the
iDOL 65 box.
• Then enter the key (KEY) shown on the label.
• Press
.
Save
The camera will go though the initial states described in the section Camera status and troubleshooting [} 7].
This means that when the camera is ready for calibration, the Power LED is ON and the Error 2 LED is flash-
ing.
To the left: the screen where the iDOL 65 is searched for and found. To the right: iDOL 65 selected for setup.
iDOL 65 Camera
www.dol-sensors.com
Technical User Guide
5