dol sensors 139 Panduan Pengguna Teknis - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna Teknis untuk Pengontrol Suhu dol sensors 139. dol sensors 139 8 halaman. Co2 - humidity - temperature sensor
Halaman CetakConnection to iDOL 63 Cloud Gateway
DOL 139 can be connected to iDOL 63 which has 8 ports for sensor connections.
If you have purchased the PRO app or access via Web-UI, you can configure the ports freely and choose
which ports are used for the sensors.
We recommend that DOL 139 is connected to iDOL 63 with the following connections
• IN1: CO2 (gray)
• IN3: Relative humidity (white)
• IN4: Temperature (black)
Figure 1: iDOL 63 Cloud gateway.
Each port works separately and must be configured separately via Omni Cloud to the connected sensor. Follow
this procedure to connect DOL 139:
1. Make sure power is disconnected from iDOL 63.
2. Select the port to be used.
3. Follow the instructions in this manual for correct connection of power, signal and ground connection.
4. Connect POE (power and internet) by means of the RJ45 internet plug.
5. Update Onmi Cloud with information about the sensors connected to the individual ports. Follow the instruc-
tions in the Omni UI User Guide or pass the information on to the owner/administrator of the Omni Cloud
account.
4
24 V
CO2
Relative humidity
GND
www.dol-sensors.com
Temperature
Technical User Guide
Temperature
DOL 139