CYP CH-2605TXV Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemancar CYP CH-2605TXV. CYP CH-2605TXV 20 halaman. 4k uhd+ hdmi over hdbaset 2.0 transmitter (pd) with hdr/arc

Halaman Cetak

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE Port: This port is reserved for firmware update and serial

control use only.

ARC & OPT LEDs: These LEDs illuminate to indicate if the optical

output source is coming from the optical input or ARC on the

connected Receiver.

Note: Selecting ARC as a source requires a compatible Receiver.

HQ/STD SWITCH Button: This switch allows the user to select which

compression mode to use when AVLC is required. A single press

toggles between modes.

HQ (High Quality) mode uses the least amount of compression and

provides the highest possible visual quality (perceptually identical

to the original). In this mode, AVLC compression activates for any

signal requiring more than 9Gbps.

STD (Standard Quality) mode applies additional signal reduction

methods to lower the bandwidth requirements even further,

improving transmission reliability at the cost of some visual fidelity.

In this mode, AVLC compression activates for any signal requiring

more than 7.5Gbps.

HQ/STD LEDs: These LEDs illuminate to indicate which AVLC mode

is selected: HQ (High Quality) or STD (Standard Quality).

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

Note: A compatible 48V PSE Receiver is required to power this

Transmitter.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active.

SERVICE

ARC

HQ/STD

OPT

SWITCH

POWER

STD

LINK