CYP PUV-1710LRX-AVLC Panduan Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemancar CYP PUV-1710LRX-AVLC. CYP PUV-1710LRX-AVLC 18 halaman. 70m hdbaset hdr transmitter & receiver
Halaman Cetak6.2 Transmitter's Rear Panel
1
DC 48V: Plug the 48V DC power adapter into this port and connect it to an AC
wall outlet for power.
2
IR1 BLASTER: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
3
IR2 EXTENDER: Connect to the provided IR Extender to extend the IR con-
trol range of remotely located devices. Ensure that the remote being used is
within direct line-of-sight of the IR Extender.
4
CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with a single
Cat.5e/6/7 cable for transmission of all data signals.
5
HDMI IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
6.3 Receiver's Front Panel
PUV-1710LRX-AVLC
1
ISP: This button is reserved for factory use only.
2
STD/UPDATE: This switch is reserved for factory use only. The default
setting is "STD".
3
RS-232 OUT: Connect to a serial controllable device for the extension
of RS-232 signals.
4
SYNC LED: This LED will illuminate when a live input source is detect-
ed.
HQ/STD LED: This LED will illuminate whenever the AVLC function is
active. A green LED indicates that AVLC is in HQ (High Quality) mode.
A red LED indicates that AVLC is in STD (Standard) mode.
POWER LED: This LED will illuminate to indicate the unit is on and
IR1
IR2
DC 48V
BLASTER
EXTENDER
1
2
3
UPDATE
STD
1
2
3
CAT5e/6/7 OUT
HDMI IN
4
5
HQ/STD
4
9