CYP CRS-232 Panduan Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima CYP CRS-232. CYP CRS-232 8 halaman. Transmitter and cat5 / rs-232 receiver extender box
Halaman Cetak
6. Operation Controls and Functions
6.1 TX Front Panel
RS-232 IN
Connect a PC/laptop ' s main control system with a DB 9 female to male
q
cable in order to send protocol to the source device.
Connect a CAT 5 cable up to 250M away and link it to the Receiver.
②
Connect the 5V DC power adaptor into the unit and plug the adaptor
③
into an AC outlet.
Note: Only one adaptor is needed for both the Transmitter and Receiver.
6.2 RX Front Panel
CAT5
①
Connect the CAT 5 cable from the Transmitter into the Receivers CAT 5
①
slot.
Connect the 5V DC power adaptor.
②
Note: Only one adaptor is needed for both Transmitter and Receiver
however, if operating at extreme distances or if no image is
displayed then two adaptors will be required.
Connect to the source device with a DB 9 male to female cable for
③
receiving and communicating with a PC/Laptop.
①
DC 5V
②
TX Rear Panel
CAT5
②
RX Rear Panel
RS-232 OUT
2
DC 5V
③
③