CYP CETH-4USB Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemanjang CYP CETH-4USB. CYP CETH-4USB 16 halaman. Cyp quad usb over ethernet extender

Halaman Cetak

6.2 Rear Panel

USB 1~4: Use to connect to USB devices such as flash drives,

external HDDs, digital cameras, printers, and etc.

The USB over Ethernet Extender is a multi-function USB HUB which

allows you to:

A. LAN Mode: Allows PC/Laptops to access USB devices over

an existing Intranet network. The LAN Mode can be used in a

home or office environment that has its own configured network

infrastructure, as the device will allow users connected to the LAN

(Local Area Network) to access up to four USB devices.

B. Extender Mode: Extend the USB operating distance over a single

RJ45 terminated CAT5e/6 cable up to 100 meters this allows the

use of USB devices in remote locations in an installation.

C. HUB Mode: Use it as a regular 4 port USB Hub. Where no signal

extension is needed, the device can be used as a 4 port USB Hub

and can be directly connected to a PC/Laptop.

For the LAN mode or Extender Mode to function, the software

application and driver (provided on the supplied CD-ROM) are

required to be installed on any connected PCs/Laptops for them

to identify and hook up with the unit in the same network using

TCP/IP protocol.

In all 3 modes, USB 2.0 (data rates up to 480Mbps) and USB 1.1

protocols (data rates up to 12 Mbps) are both supported.

Role of USB devices in a setup with this unit:

- Host Devices (PC / Laptop): Can Control this unit and any USB

devices connected to it.