CYP CH-1106RX Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemanjang CYP CH-1106RX. CYP CH-1106RX 16 halaman. Hdmi v1.3 to cat6 transmitter & receiver with ir return control
Juga untuk CYP CH-1106RX: Panduan Pengoperasian (16 halaman)

Halaman Cetak

7. Operation Controls and Functions

7.1 Transmitter Front and Rear Panels

HDMI INPUT

Transmitter

①

②

① IR Transmitter: This slot is where you connect the IR blaster cable. Place the

IR eye in front of the source equipment(s) in order to send an IR signal, the

IR blaster has a frequency range from 30KHz to 50KHz.

② HDMI INPUT: This slot is where you connect the HDMI or DVI output port of

your source equipment such as DVD/Blu-ray players or set-top-boxes

with an HDMI cable or receiver unit, you may also connect this device to

another unit from the same family or some other type of splitter to further

extend an HDMI signal.

③ POWER 5V: This slot is where you plug the 5V DC power supply into the unit

and connect the adaptor to an AC outlet.

④ DDC OUTPUT: Connect to the DDC Input of the receiver with a CAT6

cable.

⑤ Video OUTPUT: Connect to the Video Input of the receiver with a CAT6

cable.

POWER 5V

③

DDC

④

VIDEO

CAT6 OUTPUT

⑤