CYP CH-1602RX Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemanjang CYP CH-1602RX. CYP CH-1602RX 16 halaman. Hdmi over hdbaset transmitter and receiver with optical audio return (oar)
Juga untuk CYP CH-1602RX: Panduan Pengoperasian (15 halaman)

Halaman Cetak

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter's Front Panel

DC 48V POWER AUDIO IN

DC 48V & POWER LED: Plug the 48V DC power adapter into this

port and connect it to an AC wall outlet for power. The LED will

illuminate to indicate the unit is on and receiving power.

AUDIO IN: Connect to the stereo analog output of a device such

as a CD player or PC to extend it to the Receiver's AUDIO OUT L/R

port.

IR IN 2: Connect to the provided IR Extender to extend the IR

control range of remotely located devices. Ensure that the remote

being used is within direct line-of-sight of the IR Extender.

IR OUT 1: Connect to the provided IR Blaster to transmit IR signals to

devices within direct line-of-sight of the IR Blaster.

USB: Connect to a PC or Laptop to extend the USB data

connection to the Receiver's USB ports.

RS-232 IN: Connect to a PC, laptop or other serial control device

with a 3-pin adapter cable for the extension of RS-232 signals to

the Receiver. When receiving commands from the Receiver side,

depending on your equipment's pinout, the Tx and Rx pins might

need to be reversed.

UPDATE: This is reserved for firmware update use only. During

normal operation the dipswitch should be set to the right.

IR IN2 IR OUT1

2 3 4

USB

RS-232 IN

UPDATE