CYP PU-514L-KIT Panduan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemanjang CYP PU-514L-KIT. CYP PU-514L-KIT 16 halaman. Cyp pu-514l-kit v1.4 hdmi over single cat5e/6/7 hdbaset lite with 2-way ir (up to 60m)
Halaman Cetak
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
1
IR1 OUT/Emitter: Connect to the supplied IR emitter for IR signal
transmission to the source equipment. Place the IR emitter in direct line-
of-sight of the equipment to be controlled.
2
HDMI IN: Connect to an HDMI source device such as a DVD player or Set-
top Box with HDMI cable or DVI to HDMI cable.
3
IR2 IN/Receiver: Connect to the supplied IR receiver cable for IR
signal reception and transmission to IR2 OUT on the receiver unit.
Ensure that remote being used is within the direct line-of-sight of the
IR receiver.
4
DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.
5
CAT5e/6/7 OUT: Connect to the receiver unit with a single CAT5e/6/7
cable for transmission of all data signals. The yellow LED will illuminate
when both transmitter and receiver are connected together and are
powered. The green LED will illuminate when the device is connected to
the power supply.
8