CYP PU-USB-AL Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pemanjang CYP PU-USB-AL. CYP PU-USB-AL 16 halaman. Usb 2.0, audio & lan over cat extender

Halaman Cetak

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

PU-USB-AL-KIT

SELECT

SELECT Button: Press this button to manually toggle the unit

between Tx and Rx mode.

Note: The connected transceiver device will also change modes.

USB 2.0 (Type A) Device Ports: Connect directly to standard USB

devices such as a mouse, keyboard or flash drive to extend their USB

functionality to the currently active USB Host Port.

Note: These ports are always active, regardless of Tx/Rx mode.

USB 2.0 (Mini B) Host Port: Connect directly to a USB host such

as a PC or laptop to extend their USB functionality to all currently

connected USB devices.

Note: This port is only active when the unit is in Rx mode. Connecting a

live host to a unit that is in Tx mode will automatically switch the unit to

Rx mode.

LAN Port: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to all LAN ports at

both ends of the HDBaseT connection.

Status LED Block:

TX LED: This LED will illuminate solidly when unit is in Tx mode.

RX LED: This LED will illuminate solidly when unit is in Rx mode.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible receiver is active.

TX POWER

LAN

RX LINK