Ashford SKEINER 2 Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Alat Tenun & Aksesori Ashford SKEINER 2. Ashford SKEINER 2 9 halaman.

Locate the other arm-

support on top of the

arms. Push 3 x 40mm

⁄

") round head bolts

through the holes in the

arm-supports and arms.

Fit small washers and

nuts but don't tighten

yet.

Fit a small washer followed by the long

58mm (2 ¼") aluminium spacer to the

100mm (4") bolt. Apply a drop of oil to the spacer. Then

slide the wooden handle onto the bolt so the head of the

bolt is at the counter-bored end. Fit another small washer

and push the bolt through the arm-support and

arm from the same side as the other bolts. Secure

with a small washer and nylock

nut. Tighten with the 2 spanners

supplied. Then tighten all nuts.

Washer

PUSH

Use ordinary nut.

Spacer

Washer

Spanner