CYP CLUX-18W Panduan Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kabel dan konektor CYP CLUX-18W. CYP CLUX-18W 13 halaman. 1 by 8 hdmi 1.3 splitter
Juga untuk CYP CLUX-18W: Panduan Pengoperasian (12 halaman)
Halaman Cetak
6. Installation
Front Panel
⑤
① . HDMI OUTPUT 1~8:
Connect your LCD TV or HD monitor with
EHDMI cables.
② . EDID selection:
STD/TV – By switching to STD user can
select both deep color and audio
channels function, if switching to TV the
unit will read TV ' s EDID and send the
①
image from source accordingly.
Note: When in STD mode the deep color
is suggest switching to 8 bit for longer
distant display.
2CH/Multi CH – Support 2 channels or
Multi audio channels audio function.
This selection is only available when EDID
is in STD mode.
Note: When Multi CH is selected TV/
display must also support Multi CH
function otherwise, TV/display will have
no audio output unless, HDMI output
connect to AVR and then to TV/display.
②
8/12 bit – Support 8 or 12 bit ' s deep color
function. This selection is only available
when EDID is in STD mode.
Note: When HDMI output has both 8 bit
③
and 12 bit displays, to ensure all output
will display, switch to 8 bit is imply with
④
the first HDMI output of 8 bit ' s displayer.
On the other hand, when all output are
with the same bit ' s displayer of 12 bit or
8 bit then switch the function to 12 bit or
8 bit will be proper. The splitter will not
function according to different bits ' of
display on HDMI outputs simultaneously.
③ . Sys. Reset: System reset function.
It is suggest having this function switch
OFF always except when doing system
reset. By switching to ON the system will
reset HDMI output to HDMI 1 within 8~10
minutes, switching to OFF means CEC
bypass.
Note: The system reset function only
functioning when the displayer is build
with CEC function.
④ . Power & LED: Power switch On/Off Red
LED illuminate when power is on.
⑤ . HDMI INPUT: Connect your source
3