Cypress CY14NVSRAMKIT-001 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Mikrokontroler Cypress CY14NVSRAMKIT-001. Cypress CY14NVSRAMKIT-001 2 halaman. Nvsram development kit

Halaman Cetak
CY14NVSRAMKIT-001
nvSRAM DEVELOPMENT KIT
• This kit is designed for use with Cypress's FM4 MCU Evaluation
Board (SK-FM4-U120-9B560)
• Download the kit installer and documentation from
www.cypress.com/CY14NVSRAMKIT-001
• Configure the MCU for program. Upon successful programming,
configure the MCU for run. Refer to the Kit Operation chapter 4 in
CY14NVSRAMKIT-001 User Guide for the MCU configurations
• Ensure J15 on the MCU is configured in the 3V position, for the
3.3 V operation before connecting the kit to the MCU
• Connect the kit to the MCU as shown below
LED1
LED2 (INT/INT1)
• Power up the board via the USB connection (CN4). LED2 on the MCU and
LED1 on the CY14NVSRAMKIT-001 board will glow Green. LED2 (INT/INT1)
on the CY14NVSRAMKIT-001 board is factory programmed to blink at the
rate of 1-Hz. Run the kit software to evaluate nvSRAM features
© 2015 Cypress Semiconductor Corporation.
All rights reserved. All trademarks or registered
trademarks referenced herein are the properties
of their respective owners. 002-00103 Rev.**
J15
LED2