Cypress CY3655 Panduan Pengguna Perangkat Keras - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna Perangkat Keras untuk Mikrokontroler Cypress CY3655. Cypress CY3655 17 halaman.

4. Make sure the appropriate module supporting your specific enCoRe II or Wireless

enCoRe II device is in the memory-style DIMM slot of the Modular Programmer Base.

See the table below to find which module and which orientation of the module supports

your device. Note that the correct side of the module (A or B) must be connected to the

DIMM connector, and the module must be snapped properly in place.

5. Launch the PSoC Programmer application.

6. In the programming application, select the Port as the MiniProg. After selecting the

MiniProg, make sure in the "Results" column of the window that an unexpected firmware

version was not found. If necessary, update the MiniProg's firmware by choosing

"Upgrade Firmware" in the "Utilities" menu.

7. First select the appropriate device family then select the device to be programmed.

8. Load the programming file using the "File Load" button.

9. Program.

CY3655 Hardware User Guide

Page 12 of 16