Cypress CY3273-LV Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Motherboard Cypress CY3273-LV. Cypress CY3273-LV 2 halaman. Plc evaluation kit

Connect the power adapter from the

mains to header J4 on the first CY3273

board (node 1). The blue LED turns on.

Attach one end of the USB-I2C Bridge to header

J8 on node 1. With the mini USB cable, connect

the Bridge to the PC. The green LED must turn on.

Note If the USB-I2C bridge was shipped before

September 2011, connect only one bridge for

each PC. For more details, refer to Section 1.3 in

the PLC Control Panel User's Guide.

For the latest information about this kit visit

www.cypress.com/go/plc

properties of their respective owners.

CY3273-LV PLC EVALUATION KIT

QUICK START GUIDE

Attach one end of the custom daisy chain cable

to header J1 on node 1 (connector hook facing

in). Connect the other end to header J4 on the

second CY3273 board (node 2). The blue LED

turns on.

Install and run the PLC Control Panel GUI from

the CY3273 kit CD. Download the latest

revision from the software and drivers link at

www.cypress.com/go/plc.

Follow the instructions in Section 1.3 of the PLC

Control Panel User's Guide to communicate

between nodes 1 and 2. To open the user's

guide from the GUI, click Help > Users Guide

from the menu bar.

DOC#: 001-54835 REV *E