Ashly FA-125.4 Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penguat Ashly FA-125.4. Ashly FA-125.4 13 halaman. 4- and 2-channel power amplifier

Ashly FA-125.4 Panduan Pengoperasian
FA Amplifier • Operating Manual

Table of Contents

1
.................. 4
2
................ 4
.......................... 4
...................... 5
.....................5
...................... 5
............................ 6
3
4
................... 7
...................... 7
................... 7
................. 7
5
.................... 8
.................... 8
...................... 8
polarity............ 8
........................ 9
..................9
...........................9
6
7
....... 11-12
8
.................... 13
1

Introduction

Thank you for your purchase of this Ashly
FA power amplifier. This product uses state
of the art, light weight, high efficiency
switching technology developed through
years of design and testing. FA amplifiers are
available in two power levels, designed to
......... 5
meet the most demanding live sound and fixed
installation sound systems in stadiums, arenas,
performance venues, restaurants, worship
....... 6
spaces and conference centers.
...... 7
1.2
Features
2 x 125W (half-rack), 4 x 125W (half-rack),
or 4 x 250W (full-rack)models
Active power factor correction (PFC)
....... 8
Power-sharing on 125W models
Low-Z or High-Z (70V/100V) output mode
per channel
Euroblock input and output connectors
............. 8
............ 8
Front panel soft-power switch
............. 8
Front panel level controls, fully off = mute
9
Front panel status LED per channel for
9
signal, limit, mute, input clipping, protect
Input sensitivity select: +4dBu or -10dBv
........ 9
Standby mode contact closure with normally
................9
open/normally closed polarity switch
Automatic sleep mode (non-defeatable)
.......... 10
Front panel lock
Remote DC level control per channel (2 channel
model), per channel pair (4 channel models)
Protect mode fault logic output
Universal 100-240VAC operation, 50-60Hz
Detachable AC connector
USB connector for firmware update
Variable cooling fan
Rack mount or table/wall mount kit available
for half-rack models
Rear support kit available for all models
Protection: Over-temperature, output short-
circuit/over-power, output DC, mains fuse
Safety/Compliance: UL, CE, FCC Class B,
Energy Star®, RoHS
Ashly five year warranty
2

Requirements

Before connecting to AC mains power,
make sure that the mechanical installation,
wiring, cooling requirements, and controls
are all set to the configuration needed for
your particular application. Failure to do so
could result in damage to the unit or to other
components in the system.
2.1
AC Mains Requirements
This amplifier will auto-detect AC mains voltage
from 100-240VAC, 50-60Hz. At nominal 120VAC
mains, the allowed operating range is 85-
135VAC to allow for brownouts or power surges,
and for nominal 240VAC operation the range is
170-265VAC. Use only the provided AC cord to
connect to AC mains. The power consumption
is indicated on the back panel near the AC inlet.
To reduce the risk of ground loop hum, all sound
system ground references should originate at the
same AC power distribution point. Do not lift or
remove the amplifier power cord ground pin.
4