Cypress CMIR-44 Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat Keras Komputer Cypress CMIR-44. Cypress CMIR-44 12 halaman. 4 by 4 infrared matrix
Juga untuk Cypress CMIR-44: Panduan Pengoperasian (12 halaman)

Halaman Cetak

7.2 Rear panel

IR OUT ALL: This slot is where you connect the IR blaster cable included in

the package. Place the IR blaster in direct line-of-sight of the equipment

to be controlled for it will blaster out all signal received from IR IN 1~4.

IR OUT A~D: These slots are where you connect the IR blaster

②

cables included in the package. Place the IR blaster in direct line-of-sight

of the equipment to be controlled for it will blaster out the signal choosen

by IR IN 1~4.

IR IN ALL: This slot is where you connect the IR receiver cable included in

③

this package for IR signal reception. Ensure that remote being used is

within the direct line-of-sight of the IR receiver for it will send out the signal

to IR out A~D.

IR IN 1~4: These slots are where you connect the IR receiver cables

④

included in the package remote control. Ensure that remote being used is

within the direct line-of-sight of the IR receiver for it will send out the signal

to the selected IR out from A~D and IR OUT ALL.

DC 5V: Plug the 5V DC power supply into the unit and connect the

⑤

adaptor to an AC outlet.