Ashly MX-206 Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Mixer Musik Ashly MX-206. Ashly MX-206 12 halaman. Stereo microphone mixer
Juga untuk Ashly MX-206: Catatan Teknis & Spesifikasi (2 halaman), Panduan Pengoperasian (8 halaman), Panduan Pengoperasian (9 halaman), Panduan Pengoperasian (12 halaman)

Halaman Cetak

Page - 10

Safety Instructions – 3

Introduction - 4

SPECIFICATION

MX-206 Mixer – 5

DISTORTION

Connectors & Cables – 5

THD at +20 dBu, 20Hz-20KHz, input switch at -40dB

Physical Description - 6

IMD (SMPTE) at +20dBu, input switch at -40dB

HUM & NOISE (20Hz-20KHz , input switch at -60dB)

Installation – 7

Equivalent input hum and noise

Typical Applications - 8

Residual output noise, TRS outputs, all levels at minimum

Troubleshooting - 9

Residual output noise, XLR outputs

Master Level at nominal, all Ch. Level controls at min

Dimensions - 9

Master Level and one Ch. Level at nom

Specifications - 10

MAXIMUM VOLTAGE GAIN (±2dB)

Warranty - 11

Mic Input to Master Output, 600 ohm load

Aux In to Master Output

Frequency Response - 20Hz-20Khz

Crosstalk - between any inputs or outputs 20Hz-20KHz

VU METERS - Two 6-segment LED meters

PEAK INDICATORS

PHANTOM POWER

SHIPPING WEIGHT

POWER REQUIREMENTS

Unless otherwise stated, specification conditions are: 150 source, Input set at "-40", all

other controls set at nominal.

Operator Manual – MX-206 Mixer

Peak Clip indicator on each input channel and left and right

outputs, illuminates 3dB below clipping

+48 VDC applied to all Mic Inputs, switchable on front panel.

Maximum total current draw = 80mA.

Maximum single channel current draw = 14mA.

Gradual power-up and down to eliminate"pops".

100-240 Volts, 50-60 Hz, 30 watts

MX-206

<0.05%

<0.02%

<-127dBu

<-100dBu

<-90dBu

<-84dBu

<-80dBu

<-84dB

<-34dB

+0/-0.5dB

<-60dB

0VU = +4dBu

13 lbs. Maximum