Ashly MX-406 Catatan Teknis & Spesifikasi - Halaman 2
Jelajahi secara online atau unduh pdf Catatan Teknis & Spesifikasi untuk Mixer Musik Ashly MX-406. Ashly MX-406 2 halaman. Stereo microphone/line mixer
Juga untuk Ashly MX-406: Panduan Pengoperasian (12 halaman), Panduan Pengoperasian (12 halaman), Panduan Pengoperasian (12 halaman), Panduan Pengoperasian (16 halaman)
Specifications MX-406
TOTAL HARMONIC DISTORTION:
< 0.05 % @ +4dBu
<0.05% @ +12dBu
INTERMODULATION DISTORTION (SMPTE IM)
<0.05% @ +12dBu
HUM & NOISE (20 Hz-20 KHz noise bandwidth):
< -127 dBu equivalent input hum and noise, TRS Output
< -100dBu residual output noise; TRS outputs, all level controls at min.
< -98 dBu residual output noise; XLR outputs, all controls at min
< -80 dBu Aux Out; Master Level and all Channel Levels at nom.
MAXIMUM VOLTAGE GAIN:
MASTER
+84 ± 2dB—Mic/Line to Mono Output
+84 ± 2dB—Mic/Line Input to Master Output.
AUX SENDS
84 ± 2dB—Mic/Line Input to Aux Master Output, pre Channel Level
99 ± 2dB—Mic/Line Input to Aux Output, post Channel Level
TAPE/CD IN
32 ± 2dB—Stereo/Aux Input to Master Output
FREQUENCY RESPONSE:
+0.5/-1.0 dB 20 Hz to 20 KHz.
Input Specifications:
INPUT
BALANCED/
UNBALANCED
MIC INPUTS
Balanced,
(1-6)
LINE INPUTS
Balanced
(1-6)
AUX
Unbalanced
RETURN
TAPE/CD IN
Unbalanced
Output Specifications:
OUTPUT
BALANCED/
UNBALANCED
STEREO OUT (L,R)
Pseudo Balanced
MONO OUT,
Transformer Balanced
AUX OUT
Pseudo Balanced
TAPE OUT (L,R)
Unbalanced
Notes: 1. 0 dBu = .775 Vrms. 2. Sensitivity is input signal level which will produce +4 dBu out with all levels maximum.
MX-406 Rear Panel
Applications:
Live Sound Reinforcement, Field Broadcast Production, Club Installations, Public Address Systems, Restaurants, Boardrooms,
Houses of Worship, Lecture Halls, Auditoriums
Ashly manufactures a complete and comprehensive line of Analog and Digital Signal Processors, Power
Amplifiers, Mixers, and Amplifier Input Options. Please call, write or visit our web site for information on
INPUT LEVEL
LOAD
& PAD
IMPEDANCE
Input level @ -60, pad out
> 1K ohm
Input level @ -20, pad out
Input level @ -20, pad in
Input level @ -24
> 10K ohm
Input level @ +22
NA
> 10K ohm
NA
> 10K ohm
SOURCE IMPEDANCE
< 200 ohm
600 ohm
< 200 ohm
< 680 ohm
any of these Ashly Products.
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Tel: (585) 872-0010, Fax: (585) 872-0739
www.ashly.com, e-mail: [email protected]
EQUALIZATION:
LOW ± 12dB at 70Hz, shelving.
HIGH ± 12dB at 8KHz, shelving.
CROSSTALK:
< -65 dB, adjacent inputs, 20 Hz--20 KHz.
VU METERS:
Two 10-segment LED meters, L/R, 0 VU = + 4 dBu.
PEAK INDICATORS:
Peak CLIP indicator on each input channel and left and right outputs,
illuminates 3 dB below clipping.
PHANTOM POWER:
+ 48 VDC applied to all Mic Inputs, switchable on front panel
80mA maximum total current draw
14mA maximum single channel current draw
Gradual power-up and down to eliminate "pops."
DIMENSIONS:
19" wide x 3.5" high x 8.0" deep.
SHIPPING WEIGHT:
15lbs.
POWER REQUIREMENTS:
100 - 240VAC, 50-60 Hz, 30 watts
FOR USE WITH
SENSITIVITY
NOMINAL
50 ohm to 600 ohm mics
-80dBu
-40dBu
-20dBu
600 ohm lines
-38dBu
NA
600 ohm lines
-26dBu
600 ohm lines
-30dBu
FOR USE WITH
OUTPUT LEVEL
NOMINAL
NOMINAL
> 600 ohm lines
+4 dBu
> 600 ohm lines
+4 dBu
> 600 ohm lines
+4 dBu
10K ohm lines
-6 dBu
MAX. INPUT LEVEL
CONNECTOR
BEFORE CLIP
-42dBu
Female XLR--1/4" TRS
0dBu
Combo Jack
+20dBu
-2dBu
Female XLR--1/4" TRS
+23dBu
Combo Jack
+23dBu
1/4"
+15dBu
RCA Jacks
CONNECTOR
MAX BEFORE CLIP
+24 dBu
1/4" TRS Phone Jack
+24 dBu
Female XLR
+24 dBu
1/4" Phone Jack
+12 dBu
RCA Phono Jack