Ashly MQX-2310 Panduan Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan Perekaman Ashly MQX-2310. Ashly MQX-2310 16 halaman. Graphic equalizer
Juga untuk Ashly MQX-2310: Brosur (1 halaman), Panduan Pengoperasian (12 halaman), Catatan Teknis & Spesifikasi (2 halaman), Panduan Pengoperasian (13 halaman)
Halaman Cetak
Operating Manual - MQX-2310, MQX-1310, and MQX-2150 Graphic Equalizer
Input
Chassis
Ground
Ground
(-)
(+)
(-)
Channel One
Input
Chassis
Ground
Ground
(-)
(+)
(-)
Channel Two
6.3 Grounding
The terminal strip has two ground connections,
one for input ground and one for chassis ground. The
equalizer is shipped with a jumper strap connecting these
two grounds. Normally, this strap should be left in place
so the chassis and input grounds are connected. In a rack-
mount installation where the equalizer is connected to
other equipment with unbalanced inputs or outputs and
the rack itself provides a good electrical connection be-
tween the equalizer chassis and the other equipment, it
may be desirable to remove this strap to isolate the input
ground from chassis ground and avoid a ground loop.
Unless you have such an installation and have a hum prob-
lem you can't solve by other means (ie: using balanced
input and output connections), leave the ground jumper
strap in place.
Output
hannel One
Output
(+)
Output
(+)
3
2
1
(+)
(-)
3
2
1
Input is 20K active balanced.
Output may be wired balanced
or unbalanced. Maximum in/out
level is +22dBu.
(+)
(-)
Balanced
Input
Channel Two
Output
7