Dolphin BC 2012 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengering Dolphin BC 2012. Dolphin BC 2012 12 halaman. Automatic velocity hand dryer

Before installing the hand dryer

Installation location

Install the hand dryer in a location where it will be easy to use, and ensure that there is

adequate space around the dryer for cleaning and maintenance.

If the unit is installed too low, water may splash onto the dryer when the floor is being

cleaned. (The bottom of the hand dryer must be mounted at least 150mm above the

floor).This is also required to gain access to the HEPA filter for cleaning and/or

replacement.

The left hand side of the hand dryer must be at least 100mm away from any walls, to

allow access to the power switch, speed & heat setting switches.

We recommend that the right hand side of the dryer should be at least 100mm from any

wall/objects.

Avoid installing the hand dryer in locations where people or doors might bump into the

dryer.

Choose a completely flat surface on the wall to install the dryer.

BC 2012 User Manual