Cypress Semiconductor CY7B992 Lembar Spesifikasi

Jelajahi secara online atau unduh pdf Lembar Spesifikasi untuk Perangkat Keras Komputer Cypress Semiconductor CY7B992. Cypress Semiconductor CY7B992 20 halaman. Cypress programmable skew clock buffer specification sheet

Halaman Cetak

Features

■

All output pair skew <100 ps typical (250 maximum)

■

3.75 to 80 MHz output operation

■

User selectable output functions

❐

Selectable skew to 18 ns

❐

Inverted and non-inverted

❐

Operation at 1⁄2 and 1⁄4 input frequency

❐

Operation at 2x and 4x input frequency (input as low as 3.75

MHz)

■

Zero input to output delay

■

50% duty cycle outputs

■

Outputs drive 50Ω terminated lines

■

Low operating current

■

32-pin PLCC/LCC package

■

Jitter < 200 ps peak-to-peak (< 25 ps RMS)

Logic Block Diagram

Cypress Semiconductor Corporation

Document Number: 38-07138 Rev. *B

TEST

PHASE

FREQ

FILTER

DET

REF

4F0

4F1

SELECT

INPUTS

(THREE

LEVEL)

3F0

3F1

2F0

2F1

1F0

1F1

•

198 Champion Court

Programmable Skew Clock Buffer

Functional Description

The CY7B991 and CY7B992 Programmable Skew Clock Buffers

(PSCB) offer user selectable control over system clock functions.

These multiple output clock drivers provide the system integrator

with functions necessary to optimize the timing of high perfor-

mance computer systems. Each of the eight individual drivers,

arranged in four pairs of user controllable outputs, can drive

terminated transmission lines with impedances as low as 50Ω.

They can deliver minimal and specified output skews and full

swing logic levels (CY7B991 TTL or CY7B992 CMOS).

Each output is hardwired to one of the nine delay or function

configurations. Delay increments of 0.7 to 1.5 ns are determined

by the operating frequency with outputs that skew up to ±6 time

units from their nominal "zero" skew position. The completely

integrated PLL allows cancellation of external load and trans-

mission line delay effects. When this "zero delay" capability of the

PSCB is combined with the selectable output skew functions,

you can create output-to-output delays of up to ±12 time units.

Divide-by-two and divide-by-four output functions are provided

for additional flexibility in designing complex clock systems.

When combined with the internal PLL, these divide functions

enable distribution of a low frequency clock that are multiplied by

two or four at the clock destination. This facility minimizes clock

distribution difficulty, allowing maximum system clock speed and

flexibility.

VCO AND

TIME UNIT

GENERATOR

4Q0

4Q1

SKEW

3Q0

3Q1

SELECT

2Q0

MATRIX

2Q1

1Q0

1Q1

•

San Jose

CY7B991

CY7B992

CA 95134-1709

•

408-943-2600

Revised June 22, 2007

[+] Feedback