Akron Brass AFTK-LK-KIT Petunjuk Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Peralatan Uji Akron Brass AFTK-LK-KIT. Akron Brass AFTK-LK-KIT 3 halaman. Apparatus flow test kit

Halaman Cetak

Pumper

WARRANTY AND DISCLAIMER*: We warrant Akron Brass products for a period of five (5) years* after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which

fails to satisfy this warranty. Repair or replacement shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service. We will not be responsible for: wear and

tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or modification after delivery; failure to follow our instructions or recommendations; or anything else beyond

our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY STATEMENT, AND WE DISCLAIM ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential, incidental or indirect damages (including, but not limited to, any loss of

profits) from any cause whatsoever. No person has authority to change this warranty. Unless otherwise provided herein. Akron Brass industrial electronic components & the Severe-Duty Monitor have a one

(1) year warranty. Select Akron Brass handline nozzles and valves carry a ten (10) year warranty. Weldon products have a two (2) year warranty from date of manufacture (excluding consumable

components). Select Weldon LED products carry a five (5) year warranty. Honda products have the manufacturers' warranty and Akron Brass disclaims any warranty in respect of those products.

Sheet: 127169

STYLE AFTK-LK-KIT, AFTK-SK-KIT

APPARATUS FLOW TEST KIT OPERATING INSTRUCTIONS

Fire Hose 1

Fire Hose 2

PHONE: 800.228.1161 I WEBSITE: www.akronbrass.com

Revision 09/2020

AFTK Test Set Up

Akron Brass AFTK Flow Test Kit Set Up Recommendations

for Fire Apparatus Pump Testing

• The fire hose arrangement should allow for the discharge

of the rated capacity of the pump to the AFTK Flow Test Kit

• Where there are two or more hose lines used with the AFTK

Flow Test Kit they should be siamesed into a heavy-stream

appliance (monitor or other device)

• A properly secured monitor or other device shall be used to

prevent movement of the AFTK Flow Test Kit during the test

• Refer to the latest edition of NFPA 1911 for complete details

regarding testing of in-service emergency vehicles

Below is a graphical example of a potential set up using

the AFTK Flow Test Kit

Monitor or

other device

AFTK

w\Pitot

Page: 3 of 3