Cypress Semiconductor CY4501 CCG1 DVK Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Mikrokontroler Cypress Semiconductor CY4501 CCG1 DVK. Cypress Semiconductor CY4501 CCG1 DVK 4 halaman.
Halaman Cetak
Step 2: Verify jumper settings on the CCG1 Host board. Use SuperSpeed USB Type-A to Type-B
cable to connect a PC with the Host board's SuperSpeed USB Type-B connector
(receptacle) J12.
J11, Provision for Measuring
Current Consumption of CCG1
(Default Short)
SW2, CCG1 Reset Switch
J10, CC1 Rp Selection
for Current Advertisement
1-2: 900 mA for USB SS
2-4: 1.5 A (Default Setting)
2-3: 3.0 A
Step 3: Verify jumper settings on the CCG1 Client board. Using a USB 2.0 Type-A to Mini-B cable,
connect a PC to the USB Mini-B connector J7 of the Client board to provide power.
J11, Decides the Power Source
1-2: Power from MiniProg3
2-3: 5 V power regulated from 24 VDC,
Also see J3 settings.
2-4: Power from J7 USB Mini-B
Connector (Default)
J10, Provision for Measuring
Current Consumption on
VCONN (Default Short)
SW2, CCG1 Reset Switch
J12, Provision for Measuring
Current Consumption of CCG1
(Default Short)
QUICK START GUIDE
J4, Decides the 5 V Power Source
for the Board
1-2: Power from MiniProg3
2-3: Power from USB Type-C
Connector
2-4: Power from J3 USB Mini-B
Connector
2-5 : Power from J12 USB
SuperSpeed Connector (Default)
J6, Provision for Measuring
Current Consumption on VCONN
(Default Short)
J8, CC2 Rp Selection for Current
Advertisement
1-2: 900 mA for USB SS
2-4: 1.5 A (Default Setting)
2-3: 3.0 A
J5, J6, Rp Selection on CC2
and CC1
1-2: 900 mA for USB SS
2-4: 1.5 A (Default Setting)
2-3: 3.0 A
24 V Power Jack
J3, Decides the Power Source
1-2 and 3-4 Shorted: Power from
Type-C Connector
5-6 and 7-8 Shorted: Power from
24 V Power Jack (Default Short)