Cyrus CM 17 Hybrid Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Ponsel Cyrus CM 17 Hybrid. Cyrus CM 17 Hybrid 20 halaman.
Halaman Cetak
2. Introduction
2.1 Insertion and removal of the SIM Card(s) and/or
SD Card(s)
Turn off the phone, unscrew the battery cover and remove the battery.
Now insert the SIM card (s) or a SIM card and an SD card as specified
by the slot frame, place the battery back in the device and tighten the
cover again.
2.2 Charging the battery
Charge the battery completely as following:
1. Connect the Micro USB cable to the Micro USB port on the phone.
2. Insert the plug into the socket. The battery icon is now displayed
dynamically, indicating for the user that the device is charging.
3. When charging is completed, the symbol of a full battery is displayed.
T I P :
You can also charge your mobile phone via a USB data
connection and on the computer. If the battery of your
phone has been completely consumed, it may be impossible
to charge via a USB cable. Then you should definitely use
the charger to recharge the phone battery
3. Basic functions
3.1 Switch the device on/off
Press and hold the power key to turn the mobile phone on and off.
T I P :
It takes a moment to initialize the phone. Please wait patiently.
If the mobile phone is is turned on before the SIM card is
inserted, only some functions of the mobile phone can be
used normally. After the SIM card is inserted, the phone
automatically determines whether it can be used or not.
3.2 Locking and unlocking the screen
If the mobile phone hasn't been in use for a period of time, the screen
becomes black to enter the screen-lock state and save battery power.
Lock screen/mobile phone:
press the power button.
Unlock screen/mobile phone: Press the power button, the screen
lights up, and the screen-locked state
is displayed. Tap the unlock icon and
drag it up to unlock the screen. If you
have set the lock pattern or password
protection, the mobile phone will ask
you to draw the pattern or enter a
password.
MAIN MENU » SETTINGS » SECURITY » SCREEN LOCK »
SET SCREEN LOCK » PATTERN LOCK
1. SET UP THE SCREEN LOCK » PATTERN.
2. Look for the screen tip and the sample pattern and tap twice NEXT.
3. Use your finger to draw a connecting line between 4 points to draw
the pattern.
4. Tap NEXT.
5
5. Draw the pattern again for confirmation.
6. Select OK.
After the unlocking pattern has been set, you must unlock the screen
by first moving the lock icon up and then drawing the unlocking pattern.
If you do not want to enter the pattern each time, you can turn off
screen lock mode by selecting „None" in the security settings.
SET SCREEN LOCK » PASSWORT
1. SELECT SCREEN LOCK » PASSWORD LOCK.
2. Enter at least four characters.
3. Select NEXT.
4. Re-enter the password for confirmation.
5. Select OK.
After the password has been set, you must unlock the screen by moving
the lock icon up and then entering the password. If you do not want
to enter the password each time, you can disable screen lock mode by
selecting „None" in the security settings.
N O T E :
The steps for setting the PIN screen lock mode are the same
as described above.
3.3 Operating Touch Display
You can operate the touch screen by pressing and moving your fingers
3.3.1 Selection
You can select an icon or a specific option by pressing the display.