Cyrus DAC X+ Petunjuk Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Konverter Media Cyrus DAC X+. Cyrus DAC X+ 17 halaman.

Halaman Cetak

Cyrus DAC XP+

OPERATION WITH THE AVRS7.2 REMOTE CONTROL

(DAC XP+)

The DAC XP+ is supplied with the Cyrus AVRS7.2 remote control which will

control Cyrus CD players, DVD players, tuners and surround sound decoders

in addition to the DAC XP+.

System select keys

Commands may be sent to different Cyrus system components by selecting

the appropriate system select key on the handset. These keys are marked

CD, TU/DAB, AV, AV-S and AV SETUP. The CD, TU/DAB, AV, AV-S keys

will flash when any command is transmitted to show which type of product is

under control. Commands to a Surround Decoder from the AV SETUP system

will flash the AV-S indicator.

To identify which type of product is under control, the CD, TU/DAB, AV, AV-S

keys flash when any command is transmitted. Commands to a surround

decoder from the AV SETUP system will flash the AV-S indicator.

The remote control will send commands to most products within the Cyrus

range and is compatible for use within two types of Cyrus system -

•

Stereo audio systems including a DAC XP+ as preamplifier.

•

Multi-channel AV systems including both a DAC XP+ digital

preamplifier and a Cyrus surround decoder.

Refer to the following section as appropriate to the configuration of your

system.

Controlling a stereo system

A stereo system may include the DAC XP+, a CD player, tuner or DVD player.

The following commands may be sent -

•

Pressing CD will send commands to a Cyrus CD player. This key will

also switch on the DAC XP+ and select an input named CD.

•

Pressing TU/DAB will send commands to DAB radios or FM Tuners.

This key will also switch on a DAB radio or FM Tuner and select an

input named Tuner. To change between DAB or FM operation, hold

down the TU/DAB key for 3 seconds until the light changes colour. The

key will light green when set for DAB commands or red when set for FM

tuner commands. NOTE:- The FM band of a DAB radio is not selected

in this way, the BAND key is used for this purpose.

•

Pressing AV will send commands to a DVD player. This key will also

switch on a DVD player and select an input named AV, Cyrus AV or AV

Direct on the DAC XP+.

The DAC XP+ will respond to the volume, balance, mute and input keys when

any of the above systems are selected. In the above examples, direct access

input select will only function when these inputs have been named using the

DAC XP+ setup menu.

NOTE - The AV-S and AV SETUP keys are not used to control this system.

Controlling a multi-channel AV system that includes both a DAC XP+

and a Cyrus surround decoder

This system will include both a DAC XP+ and a Cyrus surround decoder with

a CD player, tuner or DVD player. In such a system it is expected that -

•

Stereo sources will be connected directly to the inputs of the DAC XP+.

•

The DVD player will connect directly to the surround decoder and the

front channel outputs of the surround decoder will connect to the AV

input of the DAC XP+.

•

An MC-BUS connection loop will also be set up between at least the

DAC XP+ and the surround decoder.

The following commands may be sent -

•

Press CD to send commands to CD players. This key will also switch

on a CD player and select an input named CD on the DAC XP+.

Volume, balance, input and mute commands will also be sent to the

DAC XP+.

•

Pressing TU/DAB will send commands to DAB radios or FM Tuners.

This key will also switch on a DAB radio or FM Tuner and select the

TU input of an amplifier. To change between DAB or FM operation,

hold down the TU/DAB key for 3 seconds until the light changes

colour. The key will light green when set for DAB commands or red

when set for FM tuner commands. NOTE:- The FM band of a DAB

radio is not selected in this way, the BAND key is used for this

purpose.

•

Press AV-S to send commands to a DVD player. This key will also

switch on a DVD player and select the surround decoder via the 'Cyrus

AV' input of the DAC XP+. Volume, balance, input and mute

commands will be sent to the surround decoder.

•

Press AV SETUP to activate the blue keys and those with additional

blue legends to send setup commands to the surround decoder, such

as speaker balance settings, mode settings and input naming.

In the above examples, input select will only function when these inputs have

been named using the DAC XP+ setup menu.

NOTE - The AV key is not used to control this system.

ANGLE

DISP

User Instructions

OFF

TU/DAB

AV-S

AMPLIFIER

DVD

ZOOM

NIGHT

DSP

ADJ-

ADJ+

T-C

SETUP

BASS

TREBLE

MODE

LIPSYNC NOISE

SETUP