Cyrus DVD8 Petunjuk Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Pemutar DVD Cyrus DVD8. Cyrus DVD8 13 halaman.

Halaman Cetak

User Instructions

Welcome to the world of Cyrus!

Congratulations on your choice of Cyrus Audio-Visual products. Our state-of-the-

art design technology and outstanding quality of manufacture has won

countless awards around the world. We are confident that you will derive

great pleasure from owning a product from one of the most recognised and

respected manufacturers of audio-visual equipment.

Please read these instructions carefully before commencing installation. They

provide full guidance to help you install your Cyrus DVD8 safely and correctly.

Preparations for Installation

Before installing the DVD8 check that the following items are included in the

accessory box.

•

Warranty Card (with instruction manual)

•

AC Mains Cable

•

System Navigator Remote Control Handset

•

2 x Phono leads for MC-Bus connection

•

SCART output cable

After removing these items, please retain the packaging.

Install the DVD8 in a well ventilated location away from sources of high

temperature, dust or humidity. Never stand the DVD8 under another unit or on

any surface likely to hamper its cooling or ventilation.

INSTALLATION

(Refer to Fig.1)

Key to the rear panel drawing:

1. Coaxial Digital Output

2. Optical Digital Output

3. Analogue Audio output

4. MC-Bus connections

5. SCART A/V output

Connecting the Video Output to a Television

The video output of the DVD8 may be connected to the television in four

different ways. The choice of connection and the picture quality achieved will

depend on the options available at the TV. The connections available from the

DVD8 are-

COMPONENT VIDEO OUT socket f . This connection should be used when

connecting a high grade TV, projector or monitor equipped with individual

connectors for Component Video input.

AV CONNECTOR OUT socket e (SCART connection). This is the most

convenient connection. The SCART connector includes both RGB and

composite video signal formats. This connection will provide the best picture

quality results where the television is equipped with RGB input via the SCART

connection.

S-VIDEO (Y/C) connection from the S-VIDEO OUT socket f . This system

offers superior quality to a composite connection and should be used if the TV

has no SCART input or if the SCART input does not include RGB

connections.

COMPOSITE connection where required is available from the SCART

connector e . A SCART 'breakout' lead will be required to access the

composite video output.

6. Component video output

7. S-Video output

8. AC power inlet

9. PSX-R connection

Connecting Digital Audio to a Multichannel

Surround Sound Decoder

For Multi-Channel surround sound systems the COAXIAL a or OPTICAL b

digital audio outputs from the DVD8 must be connected to a suitable input of

a Cyrus digital surround sound decoder.

Connecting Audio to a Stereo System

If a Surround Sound decoder is not to be used the STEREO audio outputs c

of the DVD8 may be connected to a Cyrus stereo amplifier or preamplifier.

The VI or AV inputs are recommended for this.

Connecting the Audio Output to a Television

If DVD sound is required from the television, the audio output from the DVD8

may be connected to the television in two different ways. The connections

available are-

SCART connection from the AV CONNECTOR OUT socket e . If the SCART

connector is in use for video connection, stereo audio will automatically be

connected through the same cable.

STEREO audio output c . If S-Video or composite video connections are in

use to the television then a separate audio connection may be made from the

audio output sockets c .

Connecting a Cyrus PSX-R

The Cyrus PSX-R is a high quality regulated power supply, the use of which

will elevate your DVD8 into a true world-class state-of-the-art product.

The connector fitted to the umbilical cable from the PSX-R must be securely

connected to the PSX-R socket i on the rear of the DVD8. When correctly

fitted, the connector will latch into the socket.

Note: The PSX-R power supply and the DVD8 will both require connection to

the mains supply.

MC-Bus System Connection (Optional)

By using the MC-Bus connection on your DVD8, a highly functional integrated

system with full remote control may be set up. This feature is usable if you

own a Cyrus amplifier or digital surround decoder. Refer to the relevant

product handbook for MC-Bus wiring instructions.

Cyrus DVD8