ASIX AX88772A Panduan Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol ASIX AX88772A. ASIX AX88772A 19 halaman. Wince 5.0 driver installation guide
Halaman Cetak3. Revision History:
Revision Author
v1.0.14.0 Alex
v1.0.13.0 Kater
v1.0.12.0 Kater
v1.0.11.0 Francis
v1.0.10.0 Francis
v1.0.9.0
Francis
v1.0.8.0
Francis
v1.0.7.0
Francis
v1.0.6.0
Mark
v1.0.5.0
Mark
v1.0.4.0
Mark
v1.0.3.0
Mark
v1.0.2.0
Mark
v1.0.1.1
Mark
v1.0.1.0
Mark
v1.0.0.9
Mark
Date
2011/12/06
2011/08/18
2011/05/28
2010/05/26
2009/12/17
2009/12/11
2009/11/06
2009/10/06
2009/07/21
2009/06/26
2009/05/14
2009/04/29
2009/03/13
2009/02/26
2009/02/12
2009/02/09
Copyright (C) 2005-2009 Reserved by ASIX Electronics Corporation
WinCE 5.0 Driver Installation Guide
Description
1. Fix the plug/un-plug issue.
2. Fix the DHCP issue on the Mentor Ranger.
3. Fix an issue where the driver stays looping sometimes
when putting the system into suspend mode.
1. Fix plug/unplug issue when device initialize.
1. Using the critical section to protect the usb detach and
usb attach.
2. In addition to srom read/write, no longer use critical
section to protect other vendor command operations.
3. Fix multi-adapter suspend/resume issue.
4. Fix issue of ping command with specific packet size.
1. In some platforms, send a bulk request in a bulk
complete routine will cause some problems. Set a
timer in the bulk complete routine to send a bulk
request.
2. Change the PHY power up process delay time from
60ms to 600ms.
3. Fix the second adapter driver fail issue if multi
adapters plug in multi host controllers.
1. Adjust the Bulk request failed retry delay time from
0ms to 100ms to avoid taking up CPU resources and
crash issue when shutdown and restart.
1. Fix the vendor command failed issue when the PHY
ON/OFF procedure and the EEPROM read/write
procedure run simultaneously.
2. Don't call any USB function in the halt routine.
1. Fix the AX88772 PHY ON/OFF procedure.
1. Improve the throughput.
2. Used EEPROM offset 0x17 to select the power
saving mode.
1. Support multi-adapters.
1. Cover the DriverInitialize is called twice issue on
some platform.
1. Add the version string in DriverInitialize
2. Take out the QueryPerformanceFrequency function
call on normal operation.
1. Add new algorithm for power saving.
2. Fix compatibility issue with some switch
1. Use software_reset_register to power down
and power up PHY.
1. Add PHY ON/OFF procedure
2. Fix issue of ping command with big size
1. Improve the performance on USB1.1 interface
1. Fix EHCI hot-plug issue
2
AX88772A/AX88772