EG4 PDP-120A-240 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai EG4 PDP-120A-240. EG4 PDP-120A-240 10 halaman. Load center

1. Safety Information

Before any work begins, carefully read all safety instructions, and always observe them when

working on or with the system. The installation must follow all applicable national or local

standards and regulations. Consult with your AHJ to obtain the proper permits and permissions

before installation.

Incorrect installation may cause:

•

injury or death to the installer, operator or third party

•

damage to any attached equipment

Important Safety Notifications

There are various safety concerns that must be carefully observed before, during, and after the

installation, as well as during future operation and maintenance. The following are important

safety notifications for the installer and any end users of this product under normal operating

conditions.

Dangers of High Voltages and Large Current

Use caution when working with metal tools on or around the system. Risk of

electrical arcs and/or short circuiting of equipment can lead to severe injury or death

and equipment damage.

Do not make any connections or disconnections to the system with any live circuits.

Damage to system components or risk of electrical shock may occur if working with

energized circuits.

An installer should make sure to be well protected by reasonable and professional

insulative equipment [e.g., personal protective equipment (PPE)].

Before installing, operating, or maintaining the system, it is important to inspect all

existing wiring to ensure it meets the appropriate specifications and conditions for use.

Ensure that the system component connections are secure and proper to prevent

damage or injuries caused by improper installation.