Ega Master 62982 Panduan Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Listrik Ega Master 62982. Ega Master 62982 10 halaman. Analogic reversible mini torque wrench
Halaman Cetak
1. Pull the loock knob out downside. The locking and unlocking directions are indicated by
appropriate icons on the lock knob.
2. Turn the grip in the clockwise to decrease the torque, and in the counterclockwise to decrease
it.
3. The major scales show the amount of torque in both primary and secondary units. The minor
scale shows fine increments in primary units. See examples on the next page.
4. Push the lock knob back to lock the grip. The minor scale may move a small amount to either
side if the centerline mark without affecting the accuracy of your setting.
Attachments and non-standard heads will cause the applied torque to be different from the set
torque. Consequently when using them, the set torque must be adjust in accordance wuth the
fomula shown on bellow.
SETTING TORQUE
EXAMPLES OF SETTING
125 N.m. wrench
USE OF EXTENSIONS
T(E) - Torque applied by extension (desired torque)
T (W) - Torque set on the wrench
T(W)=T(E)
5