BlueRange UNL12 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Pengelasan BlueRange UNL12. BlueRange UNL12 8 halaman. Solar powered auto-darkening welding helmet
Halaman Cetak5.2 Adjusts the distance between the face and the lens.To adjust, adjust the
positioning screw moved to another location slot, forward or backward. Screw
down the screws.(Both sides must be equally positioned for proper vision,See
No.2)
3.5
Adjust the headband
5.3 Turn the adjusting knob located on the back of the headband left or right to
3.5.1 Adjusts headband for proper depth on the head to ensure correct balance and stability. (See No.1).
3.5.2 Adjusts the distance between the face and the lens.To adjust, adjust the positioning screw moved to
desired tightness.(See No.3)
another location slot, forward or backward. Screw down the screws.(Both sides must be equally positioned
for proper vision,See No.2)
5.4 Shift the segmental plate with different positioning hole to adjust the window
3.5.3 Turn the adjusting knob located on the back of the headband left or right to desired tightness.(See
angle for clear view. (See No.4) Numbers on the adjustment slides indicate set
No.3)
3.5.4 Shift the segmental plate with different positioning hole to adjust the window angle for clear view.
position so both sides can be adjusted equally.
(See No.4) Numbers on the adjustment slides indicate set position so both sides can be adjusted equally.
NO.2
NO.1
3.3
Replacing The Battery
When the battery power is low, the filter cartridge lens may not work correctly. Replace the Batteries. To
replace the battery, first unscrew the front lens retaining frame and remove this. Locate the battery holder
at the top of the Auto Darkening Filter and slide upwards to open. Remove the old battery and replace with
a new CR2032 battery. Close the battery holder and screw the front lens retaining frame back into position.
NO.2
6
NO.1
NO.3
NO.3
NO.4
NO.4
Page 5