Cytronix LSS05 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sensor Keamanan Cytronix LSS05. Cytronix LSS05 17 halaman. Auto-calibrating line sensor

6.1 Calibration button and signal.

The calibration button or the calibration signal (Cal.) has 2 functions. The 1

is to call for calibration of the line sensor and the 2

will operate for dark line following or bright line following.

6.1.1 Using the calibration push button

Press the push button once to set the sensor bar into calibration mode. LSS05 will go

into calibration mode and the red LEDs will start blinking accordingly to indicate whether it

is calibrating for dark color or bright color.

Press the push button twice will set the line sensor into dark line following mode

which LSS05 will detect dark line. Sensor indicator LEDs will light up if it detects dark

surface (the line is dark) and the output is high. When no dark line is detect, the output will

be low.

Press the push button 3 times will set the line sensor bar into bright line following

mode which LSS05 will detect bright line; sensor indicator LEDs will light up if it detects

bright surface (the line is bright) and the output is high. When no bright line is detect, the

output will be low. Dark/Bright indicator (D/B) indicator LED will light up in orange color

for this mode.

Below are examples of LSS05 output when it detects dark and bright line. Output 1 is for

DS1, output 2 for DS2 and output 3,4, and 5 for DS3,DS4 and DS5 respectively. LED ON

means that the sensor detected the line. For example, when sensor1(U1) and sensor2(U2)

detected the dark line, DS1 and DS2 will turn ON. The output for sensor1(U1) and

sensor2(U2) is high while it is low for sensor which do not detect the line (sensor3(U3),

sensor 4(U4) and sensor 5(U5)).

LED

DS1/U1 DS2/U2 DS3/U3 DS4/U4 DS5/U5

OFF

function is to set whether the sensor bar

OFF

ROBOT . HEAD to TOE

Product User's Manual – LSS05

Output

function