Ambery LCDT6 Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penyetel TV Ambery LCDT6. Ambery LCDT6 16 halaman. Super video to wxga converter external cable tv tuner

Halaman Cetak

Factory mode: Reset all the previous setup back to the factory default settings.

Description of sub item

Bright: change the brightness of the OSD session.

Mix: mixture of OSD and background

Background: Change the background style for the OSD session.

Signal Source : Change the input source. There are 3 input selections:

TV : CATV

AV: Composite Video

SV: S- Video

Color System: Setting of the color system. The default is AUTO.

Monitor Type: Change the output aspect ratio, there are 3 selections, 4:3/16:9/16:10

Display ratio: Change the VGA output resolutions at 12 different levels:

1024X 768

1280X1024

1366X 768

1600X1200

1920x1080

( Note: The output resolution should be selected within the capacity of the monitor display. If you set

the output resolution of this unit beyond the maximum that your monitor can handle, there will be no

pictures showing on the screen. Use the included remote controller to power off the video converter

first and then press "0" button three times to revert the resolution back to 1024x768 pixels when the

above-mentioned did happen. )

POP-Mode: change the POP sub window position. There are 5 selections, Canter/Bottom R/Top

R/Bottom L/Top L

Browse Mode: Selection of the quick view windows number from 4, 9 to 16.

De-noise : Adjust the noise reduction level to match the best performance with your display. There are

4 selections, High, Middle, Low and Off. ( Note: If the de-noise level is set to high mode, there will be

lagging of video on some action themes so the choice should be made with caution. )

BLE: Enhance the black color level to make the video more vivid.

GAMMA: 4-Preset gamma correction level available for selection to match the performance of

different monitor type. There are 4 selections, LCD-CRT-Bright-Off

DISPLAY Mode: Change the output monitor type, there are 2 selections, Normal or 4:3

5 Time : Sleep Timer Setting

1. Picture

2. Search

3. Audio

4. Setup

5. Time

6. Access.

This section is for users to configure the automation of system shutdown time or wake-up schedule.

800X 600

60Hz

1. Sys off

2. Sys on

3. Remind

4. Reserve

5. Time

800X 600

75Hz

1024X 768

75Hz

1280X1024

75Hz

1440X 900

60Hz

1680X1050

60Hz

1920X1200

60Hz

00:00

no use/always/once

00:00

no use/always/once

00:00

no use/always/once

00:00