Ambery HDV6 Panduan Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Pemutar Media Ambery HDV6. Ambery HDV6 7 halaman. Hdtv multimedia av center

IR Remote Control Operation mode

1. Input Channel Selection key: AV1, AV2, VGA, HDMI

 Press "AV1" button on the remote for selecting the analog video input channel #1. The

selection will be made in the sequential order of Composite Video 1, S-video 1 and

Component Video 1. Keep pressing this "AV1" button will lead the user to toggle through

all analog video inputs again.

 Press "AV2" button on the remote for selecting the analog video input channel #2. The

selection will be made in the sequential order of Composite Video 2, S-video 2 and

Component Video 2. Keep pressing this "AV2" button will lead the user to toggle through

all analog video inputs again.

* The associated stereo audio (R/L audio) inputs will be converted accordingly to digital

audio along with digital video through the same HDMI output.

 Press "VGA" button from the remote for selecting the desired PC VGA input channel.

Keep pressing this "VGA" button will lead the user to toggle through the VGA 1 and VGA

2 input.

 Press "HDMI" for selecting the HDMI input channel between HDMI 1 and HDMI 2. Keep

pressing this "HDMI" button on the remote will lead the user to toggle through the HDMI

1 and HDMI 2 input.

2. Power ON/OFF: Press this button to set the unit to be into active or standby mode.

3. 【RES.】 Select the HDMI video output resolution among 480P, 720P, 1080i and 1080P.

Press this "RES." button on the remote to set the up scaling resolution for output. The

output resolutions are listed in a sequential order. Keep pressing this button will toggle

through them all.

If the picture can not be shown on the TV screen, the TV may not be able to support the

resolution you select from this HDV6 unit. Please change to another resolution. For

example, if the TV can not show while you select 1080i, please try to change the

resolution to 720p or 1080p etc or look up the TV's user manual for reference before

adjusting the resolution.

4. 【OSD】 Display the current video input channel and output resolution information on the

screen.

5. 【Scal.】 Aspect ratio information display. Show aspect ration information(4:3 or 16:9).

6. 【MENU】 Menu of Brightness, Contrast, Saturation, Hue, and Sharpness adjustment.

Press the "MENU" button, a menu will show on the TV screen for setting adjustment.

Press down button to enter the setting. The selected item will show in yellow color.

Use up and down button to select different items, and use left and right button to adjust

the setting. The preset value is 50. The setting range is from 0 to 100.

After finish the setting, press the "MENU" button again to leave to the menu setting

mode.

7. 【Mute】 Press "Mute" button to mute the audio output.

8. 【Reset】 System Reset. Press the "Reset" button on the remote controller to restore the