d&b audiotechnik Bi8-SUB Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Subwoofer d&b audiotechnik Bi8-SUB. d&b audiotechnik Bi8-SUB 11 halaman.

Step 1

Step 2

Installing the fixed cable connection

NL4 cable connection with cover plate [1]

Step 3

To install the fixed cable connection, proceed as follows:

Tools required: Philips screw driver (#PH2).

1. Remove the knockout opening in the cover plate [1] and

attach the rubber grommet [2] correspondingly.

2. Insert the connection cable through the rubber grommet.

3. Undo the four screws of the connector panel.

4. Connect the cable wires to the screw terminal.

Þ Observe the correct polarity!

5. Push the cover plate towards the connector panel until it fits

into place.

6. Finally fix the cover plate together with the connector panel

using all screws.

Step 4/5

NL4 connection with cover plate

Note: Neutrik NL4FC type connectors must be used for this

option.

The cover plate is equipped with two knockout openings to allow

daisy chaining of the loudspeaker.

To use the NL4 connection, proceed in the same manner as

described in the previous section.

Step 6

d&b Bi8-SUB Manual 1.1 en