d&b audiotechnik E15X-SUB Manual - Halaman 7
Jelajahi secara online atau unduh pdf Manual untuk Subwoofer d&b audiotechnik E15X-SUB. d&b audiotechnik E15X-SUB 10 halaman.
Juga untuk d&b audiotechnik E15X-SUB: Manual (8 halaman)
Halaman Cetak
d&b E15X-SUB Manual 2.1 en
2.3. Operation
NOTICE!
Only operate d&b loudspeakers with a correctly configured d&b
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Applicable d&b amplifiers:
D80/D20/D12/D6/10D/30D.
Standard operation
Application
Setup
E15X-SUB
E15-SUB
Within applicable d&b amplifiers, the controller setup is available
in Dual Channel or Mix TOP/SUB mode.
Passive operation
Application
Setup
E15X-SUB
E12-X
with E12
E15X-SUB
E12-DX
with E12-D
In Dual Channel mode, the "X" setup can be selected to drive the
cabinet in combination with the E12 or E12-D loudspeaker on the
same channel.
The setup provides a dedicated correction for the combined
frequency response of the system.
2.3.1. Controller settings
For acoustic adjustment the 100 Hz mode can be selected.
100 Hz mode
If the 100 Hz mode is selected, the upper operating frequency of
the system is reduced from 140 Hz to 100 Hz. It can be used
when actively driven E15X-SUB subwoofers are used to
supplement E-Series cabinets operated in full range mode, for
example in a distributed sound system. The 100 Hz mode can also
be used to compensate for the effect of close coupling between the
E15X-SUB and E-Series operated in CUT mode, for example in a
drum fill setup.
2.3.2. Operation with E-PAC
Selecting E15-SUB mode enables the E-PAC to drive one
E15X-SUB loudspeaker.
The 100 Hz mode is available. The characteristics of the 100 Hz
mode are explained in the previous section.
Cabinets per
channel
2
Combination per
channel
1
1
7