AKRUS AK 106 vario Panduan Pengguna - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perabotan Dalam Ruangan AKRUS AK 106 vario. AKRUS AK 106 vario 19 halaman. Instrument table
Halaman Cetak
5
Set up and levelling the instrument table
o Assure solid and firm footing, avoid any danger of tipping. Level the tabletop by turning the
vertically adjustable feet (1) or castors.
o Secure the position after leveling using the lock nuts (2).
6
Main power connection
Make sure specified power limitations on the type label comply with the local power supply. If not,
correct the setting of the voltage switch (option, see chapter 3).
Caution! The setting of the voltage switch is important because a wrong setting can cause seriously
damage of the motor columm. This damage could only be repaired by the manufacturer.
7
Adjusting the table height
An electric motor drive inside the center column allows vertical adjustment of the tabletop. Position
tabletop at desired height.
Caution: Overheat protection!
The motor in the lifting column is not designed for continuous long-term operation. Therefore, lift or
lower the table only, when necessary. Operating periods of > 1 minute may cause overheating of the
motor.
8
Maintenance
The AK 106 vario is maintenance free.
9
Cleaning and care
Clean only the external surfaces of the instrument table using a damp but not wet cloth, in case of
heavy stains do not use abrasive or aggressive materials but regular cleaning detergents for cleaning.
Do not use ether, Acetone or concentrated acids.
Caution: do not use any solvents (ether, acetone), acids or abrasive cleaning agents.
444g001e.docx
2
1
2022-02-04
page 6 of 7