Bluesound A860 Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Bluesound A860. Bluesound A860 11 halaman.

All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.

OVERALL SPECIFICATIONS

Continuous output power into 8 ohms

Continuous output power into 4 ohms

Continuous output power into 8 ohms (Mono, Bridge mode)

Rated THD (250 mW to rated power, CCIF IMD, DIM 100)

Signal-to-Noise Ratio, A-weighted

Clipping power

Damping factor

Frequency response

Input sensitivity

Voltage gain

Minimum input signal to trigger auto sense mode

Rated power

Idle power

Standby power

DIMENSION AND WEIGHT

Gross dimensions (W x H x D)*

Shipping weight

* - Gross dimension includes feet and extended rear panel terminals

Specifications are subject to change without notice. Check out www.bluesoundprofessional.com for updated documentation or latest information about A860.

8 x 50W (ref. 20 Hz-20 kHz at rated THD, all channels driven)

8 x 60W (ref. 20 Hz-20 kHz at rated THD, all channels driven)

120 W (ref. 20 Hz - 20 kHz, <0.02 % THD)

<0.03 % (ref. 20 Hz - 20 kHz)

>80 dB (ref. 1 W)

>100 dB (ref. 50 W)

>155W (ref. 1 kHz, 8 ohms, 0.1% THD

>150 (ref. 8 ohms, 50 Hz and 1kHz)

±1.0 dB (ref. 20 Hz - 20 kHz)

1.1V (ref. rated power)

33 dB

>20 mV

600W (120V 60Hz, 230V 50Hz)

<26 W

<0.5 W

483 x 105 x 323 mm

x 4

x 12

inches

7.1 kg (15.7 lbs)

SPECIFICATIONS