AmbiCom BT2-USB Class I Panduan Instalasi Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Adaptor AmbiCom BT2-USB Class I. AmbiCom BT2-USB Class I 9 halaman. Wireless bluetooth usb adapter
Juga untuk AmbiCom BT2-USB Class I: Spesifikasi (1 halaman)

Halaman Cetak

Appendix A. Using Microsoft Windows XP Service Pack 2 Generic Bluetooth Software

Limitation: Not all AmbiCom Bluetooth USB adapters are Windows XP generic Bluetooth Driver compatible.

Windows XP will detect and install the generic Bluetooth driver if the Bluetooth USB adapter is one of the

Under this method, you will NOT be required to install the Bluetooth software bundled with the product. If

you have already installed the bundled software, please uninstall it now.

Note: If you have followed Step A on page 3, make sure the bth.infbak file name is restored to its original

name and also remove the installed Bluetooth software. Remember to reboot your computer before going to

the next step.

Simply insert the USB adapter into any available USB port and Windows should start to configure the system

for you.

1. Insert the Bluetooth USB adapter into any available USB port on your computer. Windows will now install

the generic Microsoft Bluetooth software for your new hardware.

2. Once the driver installation is completed. Your hardware is ready to use.

3. To add a Bluetooth device, simply double-click the Bluetooth icon from the system tray to open the

Bluetooth Devices Window. Follow the Bluetooth wizard to complete the process.

4. Contact Microsoft Corporation for more information regarding Microsoft Bluetooth profile support.

For discovering and pairing your Bluetooth devices to our Bluetooth USB device, please refer to your

Bluetooth devices manual for proper procedures and Pass Code (Pin Code).

supported devices.