Bluesound HUB Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Adaptor Bluesound HUB. Bluesound HUB 4 halaman. Wireless audio source adapter
Juga untuk Bluesound HUB: Panduan Pengaturan Cepat (2 halaman)

Halaman Cetak

THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK

CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-

CREATE THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS

NOT FUNCTIONING AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS

OR CONCERNS CONTACT AN AUTHORISED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE

PROCEEDING!

Steps to Factory Reset:

Disconnect the HUB from electrical power.

Wait 30 seconde.

Reconnect the power.

Once the LED turns Red, press and hold the FUNCTION button. The LED will immediately turn

Green and then back to Red - continue to hold the button for 30 seconds.

After 30 seconds, the LED will begin to blink red – then release the button.

All customization to the HUB will be removed and restored to factory settings.

IMPORTANT Removing your finger from the FUNCTION button at any time before the LED begins flashing

red will cancel the factory reset and leave the HUB in Upgrade Mode. Just start the steps again to factory

reset it.

You will know the factory reset is successful if the HUB returns to Hotspot mode (wireless connection - the

LED will turn solid green). If it is connected to your network through a wired Ethernet connection, it will

simply connect as if it was a new player (LED will turn solid blue).

"HiFi for a wireless generation", HUB and all other Bluesound product names and taglines

are trademarks or registered trademarks of Bluesound International, a division of Lenbrook

Industries Limited. All other logos and services are trademarks or service marks of their

respective owners.

WARNING!