Asko T780 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengering Asko T780. Asko T780 2 halaman. User manual use & care guide t760-t780 (use & care guide - en, fr)
Juga untuk Asko T780: Panduan Penggunaan dan Perawatan (16 halaman), Instalasi (1 halaman)

Asko T780 Panduan Memulai Cepat
QUICK START PROCEDURES
QUICK START PROCEDURES
1.
Press the Power button to turn on the machine.
2.
Load the dryer.
3.
Check the lint filter. Clean it, if needed.
4.
Check that the door is clear of laundry then close it firmly. (The door won't shut if it's slammed.)
5.
Press the button for the desired program (P1–P4).
6.
Press Start. The machine will start.
UNDERSTANDING THE LED WINDOW
UNDERSTANDING THE LED WINDOW
The LED window is easy to read and understand. The illustration below explains what each item on the LED window is.
Program
When you press the Power button,
the display toggles between the
program numbers and the wash
program names, (e.g., Extra Dry,
Dry, etc.)
Preset Programs
Displays the program that
is selected/running.
The LED window also displays the menus and options available when you customize the preset programs. Refer to your Use and Care
Guide for more details.
CLEANING THE LINT FILTER
CLEANING THE LINT FILTER
Although the lint in your ASKO dryer will be minimal, the lint filter should be cleaned after each load
to ensure maximum air flow and prevent possible overheating. To clean the filter, follow the steps
below:
1. Grasp the handle and pull it toward you.
2. Remove the filter from the holder by pulling it up.
3. Open the filter and gently brush away any lint.
4. Fold the filter together and return it to the holder on the door.
5. Push the holder in until it snaps into place.
NOTE:
We recommend that you clean the lint filter after every load.
EMPTYING THE CONDENSATION WATER CONTAINER
EMPTYING THE CONDENSATION WATER CONTAINER
If Model T780 is not installed to pump out the condensed water into a drain or a sink, you should empty the
water container every three to five dryer loads, depending on the spin speed you use when you wash the
clothes. For example, clothes spun at 800 rpm will have more moisture when you take them out of the
washer than clothes spun at 1400 rpm. Therefore, the dryer will have to remove more water.
To empty the container, simply pull it out and pour out the water. This water is clean and can be used to
water plants.
If the container becomes too full, the machine with shut down. To restart the program, empty the container
and press Start. It may be a few minutes before the machine starts because it drains the excess water
from the sump before it restarts.
OVERHEATING PROTECTION
OVERHEATING PROTECTION
The dryer has a protection device that shuts the machine off if the temperature becomes too high. Overheating could occur if the lint filter is
clogged or if the fan or condenser unit (Model T780) needs to be cleaned. If the dryer shuts off during a program on Model T780, first, make
sure the condensation water container is empty. If that isn't the problem, check the lint filter. Lastly, it could be the fan or condenser unit needs
to be cleaned. See your Use and Care Guide for instructions on how to clean these items.
P1
Extra Dry
P1
P2
Dry
P2
P3
Normal Dry
P3
P4
Iron Dry
P4
P2 P3 P4
Start
P1
Start
Indicates that you pressed Start
and the program is running.
NOTE:
Do not remove the water container while the machine is running.
Program Time
Time
When you start a program, the total time the
2 3
program runs is displayed. As the program
progresses, the time remaining displays. The
program time toggles between minutes (e.g.,
23) and hours (e.g., 1h).
Stop
Stop
Indicates that the program has ended
or that you pressed Stop.
T760/T780
(T780 only)
(T780 only)
Simply pull out the container
and pour out the water.