Asko TD76 Petunjuk Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Pengering Asko TD76. Asko TD76 16 halaman. Tumble dryers

S1.1

S1.2

S1.3

Program

S1.1-

Automatic programs

S1.4

In this program the drying time is controlled by the microprocessor, depending

on the moisture level measured by the moisture sensor and the dryness of the

chosen program. The temperature is controlled by the thermistor to 75°C.

By very small loads or empty machine, these programs will use a drying time of

about 20 minutes.

S1.1

Extra dry

S1.2

Normal dry 1

S1.3

Normal dry 2

S1.4

Iron dry

The programs are ended by a cooling-down sequence, which goes on till

the air temperature is ca 35°C or for a maximum time of 15 min. D2 indicates

"C" during the cooldown period.

S1.5

Timed program

One press on S1.5 means 5 min. drying time + cool down till the air temperature

is 35°C or maximum 15 minutes.

Continued pressings increases the drying time to 10, 15, 20, 30, 50, 60, 70, 80,

90, C (just cool air 15 min.), 5, 10 etc.

Drying temperature 50°C.

D1 and D2 indicates drying time in minutes. After starting the machine counts

down with 1 for each minute. Cool down sequence is indicated with "C".

Low temperature

Lowers the temperature in program S1.1-Sl.4 from 75°C to 50°C .

S2 is automatically activated in program S1.5.

Intermittent action

Means that the motor rotates for 3 seconds every minute during one hour after

end of program.

Buzzer

A buzzer tone of 3 seconds (ca 65 dBA) indicates end of program.

TD 77

S1.4

D2 D3 D4

S1.5