ambient power AP087 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol ambient power AP087. ambient power AP087 4 halaman.

Halaman Cetak
16th December 2020
Mode Reference Table
Mode Mode set type (button 1)
Power up
0
Cancel new setting
Choose light temperature
1
Set colour red
2
Set colour green
3
Set colour blue
4
Set brightness
5
Set soft on program
6
Set effects program
7
Fixing Method
To affix the module into scenery / buildings etc., double sided sticky fixers can be used, epoxy resin, hot glue etc.
Do not use conductive tapes or adhesives. Avoid obscuring the LED as light output will be reduced, and consider
if access to configuration pins is required.
Specifications
Dimensions - W 11.0mm, H 10.8mm, D 3.0mm
Weight - 5g
Voltage - 12V DC
Current - 25mA
Ambient Power
Lighting Controller User Manual
Confirmation
Button 2 selects
x flash
Purple x 2
Previous setting
White x 2
40W tungsten
100W tungsten
Halogen
Carbon arc
Fluorescent
mercury
Sodium
High pressure sodium
Full white
Red x 2
Red level low to high
Green x 2
Green level low to high
Blue x 2
Blue level low to high
Cyan x 2
Brightness low to high
Orange x 2
Instant

Fast on (0.5s)
Medium on (1s)
Slow on (2s)
Yellow x 2
Constant
Light flicker
Dodgy light bulb
TV
Real wood fire
When an effect mode is selected, the LED flashes
green 1, 2, 3, 4 or 5 times respectively to confirm
selection.
Page of
4
4
E&OE