Ambient Technologies RCSTE Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kontrol Jarak Jauh Ambient Technologies RCSTE. Ambient Technologies RCSTE 7 halaman. Thermostatic on/off remote control – 120vac

Halaman Cetak

Manual Mode

1. Press the ON button once to turn on the appliance.

2. Press the OFF button to turn it off.

Thermostatic Mode

Press the AUTO button to enter the thermostatic mode. "SET" temp icon

will appear on the lower LCD screen

In thermostatic mode, press the ON/▲ button or OFF/ ▼ button to set the

desired set temperature.

Once the setting is completed, the transmitter will automatically turn on the

fireplace when the room temperature is below the set temperature and turn off the appliance when the

room temperature is above the set temperature within 1 degree.

There will be a slight delay in the response of the unit (on/off) to a temperature. Room temperature is

monitored every 3 minutes.

Press the Auto button to exit the thermostatic mode (Return to Manual Mode). The "SET" temp icon will

disappear on the lower LCD display. The transmitter will be in the manual on/off mode

Low Battery Detection

f i r e - p a r t s . c o m

1. Battery voltage is checked once a minute. When the battery voltage drops to a

certain level, the low-battery warning will come on, and the transmitter will turn

off the appliance. The transmitter will not function anymore until fresh batteries

are installed.

2. When the batteries are low, the LCD shows a low battery indicator. The low

battery warning will be displayed in any mode.

3. The transmitter will not operate with low batteries. Change the battery before the

battery is too weak for normal operation. TURN THE UNIT OFF BEFORE

REPLACING BATTERIES.

Child-Proof Protection

1. Press and hold ON and OFF buttons simultaneously for 3 seconds to enter child-

proof mode.

2. The transmitter will not work until child-proof mode is deactivated by pressing

the ON and OFF buttons simultaneously for 3 seconds again to exit child-proof

mode.

Transmitter Thermal Shutdown

1. If transmitter measures a room temperature exceeding 99 degrees Fahrenheit, the

LCD will display "HI" and the transmitter will turn off the appliance.

2. Transmitter will not function until the room temperature has dropped below 99

degree Fahrenheit.

3. If transmitter measures a room temperature less than 40 degrees Fahrenheit, the

LCD will display "LO" and NO SIGNAL will be sent to turn on the appliance.

50D0104 RCSTE Rel 0 Feb 10 2006

Page 5 of 7

Ambient Technologies

A Division Of Monessen Hearth Systems