Ambient Weather TESA WS710 Buku Petunjuk - Halaman 11
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Stasiun Cuaca Ambient Weather TESA WS710. Ambient Weather TESA WS710 14 halaman. Wireless indoor/outdoor 8-channel thermo-hygrometer with daily min/max display
The purpose of your weather station is to measure conditions of your
surroundings, which vary significantly from location to location.
5.6.1 Humidity Calibration
Prior to entering the calibration mode, press the CHANNEL/+ button to
select the humidity sensor you wish to adjust.
To enter the humidity calibration mode, press and hold the
ADJUST and MIN/MAX buttons at the same time for 5 seconds
and the humidity value will begin flashing. Press the CHANNEL/+
button to increase the humidity and the MIN/MAX/- button to
decrease the humidity reading in 1% increments. To rapidly
increase (or decrease) the humidity reading, press and hold the
CHANNEL/+ or MIN/MAX/- button.
To return the humidity to the actual or uncalibrated measurement,
press the ADJUST button.
Once the displayed humidity equals the calibrated source, press
and hold the ADJUST button for three seconds, or wait 15
seconds for timeout, and the humidity value will stop flashing.
5.6.2 Temperature Calibration
Prior to entering the calibration mode, press the CHANNEL/+ button to
select the temperature you wish to adjust.
To enter the temperature calibration mode, press and hold the
ADJUST button for 5 seconds and the temperature value will begin
flashing. Press the CHANNEL/+ button to increase the temperature
and the MIN/MAX/- button to decrease the temperature reading in
0.1°C increments. To rapidly increase (or decrease) the temperature
reading, press and hold the CHANNEL/+ or MIN/MAX/- button.
To return the temperature to the actual or uncalibrated measurement,
press the ADJUST button.
Once the displayed temperature equals the calibrated source, press
and hold the ADJUST button for three seconds, or wait 15 seconds for
timeout, and the temperature value will stop flashing.
-11-