Ambient Weather F007TP Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Termometer Ambient Weather F007TP. Ambient Weather F007TP 10 halaman. 8-channel wireless probe thermometer
Halaman Cetak
1
DOWN
DOWN
DOWN
DOWN
UP
UP
UP
UP
---
---
5. Insert two AAA batteries.
6. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and
then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data.
7. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 3.
temperature
(1)
(2) temperature units (
(3) channel number
8. Close the battery door. Make sure the gasket (around the battery compartment) is properly
seated in its trace prior to closing the door. Tighten the set screw.
3 Remote Sensor Installation
The remote probe sensors have many applications, including measuring inside/outside air temperature,
water temperature, soil or ground temperature and refrigerator / freezer temperatures.
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
DIP SWITCH
2
3
DOWN
DOWN
DOWN
UP
UP
DOWN
UP
UP
DOWN
DOWN
DOWN
UP
UP
DOWN
UP
UP
---
---
---
---
Table 1
Figure 3
°F vs. °C)
FUNCTION
4
---
Channel 1
---
Channel 2
---
Channel 3
---
Channel 4
---
Channel 5
---
Channel 6
---
Channel 7
---
Channel 8
DOWN
°F
UP
°C
Page 4