Ambient Weather WS-09 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Termometer Ambient Weather WS-09. Ambient Weather WS-09 15 halaman. 8-channel wireless refrigerator/freezer thermometer

Halaman Cetak

4.2.2 Alarm Defaults

Channel Application

Refrigerator

Freezer

4.2.3 Setting the Min and Max Alarm

With the indicator arrow

for 3 seconds and the MAX alarm will flash. Press the CHANNEL/+ button to increase the MAX

alarm and the CLEAR/- button to decrease the MAX alarm. Press and hold the + or - button to change

rapidly.

Press the ALARM button again and the MIN alarm will flash. Press the CHANNEL/+ button to

increase the MIN alarm and the CLEAR/- button to decrease the MIN alarm. Press and hold the + or -

button to change rapidly.

When complete, press the ALARM button again, and the display will return to normal mode.

4.2.4 Viewing the Min and Max Alarms

With the indicator arrow

button to view the Channe1 (refrigerator) and Channel 2 (freezer) alarm limits.

4.3 Reset Max/Min

With the indicator arrow

button for 3 seconds to restore the MAX and MIN values to the current value.

4.4 Temperature Units of Measure

With the indicator arrow

ALARM button for 3 seconds to change between degrees Celsius and degrees Fahrenheit units of

measure.

4.5 Sensor Search Mode

If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire

the signal:

1. If a specific channel is lost, press the CHANNEL/+ button until the channel indication arrow

is pointing at the appropriate channel.

Press and hold the CHANNEL/+ button for 3 seconds, and the remote search icon

be constantly displayed for up to 10 minutes.

Once the signal is reacquired, the remote search icon

will be displayed.

2. If new sensors are added, subtracted, or multiple sensor channels are lost, press the

CHANNEL/+ button until the channel indication arrow

temperature

search icon

reacquired, the remote search icon

Version 1.0

Default Condition

OFF

pointing at the appropriate channel, press and hold the ALARM button

pointing at the indoor temperature

pointing at the appropriate channel, press and hold the CLEAR/-

pointing at the indoor temperature

. Press and hold the CHANNEL/+ button for 3 seconds, and the remote

will be constantly displayed for up to 10 minutes. Once the signal is

will turn off, and the current value will be displayed.

MIN (low alarm) ºF

-22

channel, press the ALARM

channel, press and hold the

will turn off, and the current value

is pointing at the indoor

MAX (high alarm)

ºF

will

Page 10