Acer TravelMate C110 Series Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Laptop Acer TravelMate C110 Series. Acer TravelMate C110 Series 8 halaman.
Juga untuk Acer TravelMate C110 Series: Panduan Cepat Pengguna (3 halaman), Panduan Pengguna (25 halaman)

Halaman Cetak
4

Canada - Low-power license-exempt radio communication devices (RSS-210)

a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation
outdoors is subject to licensing.

List of applicable countries

This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact the
local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.

First things first

Usage Notes

Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display housing.
•
Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Don't:
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
In extremely hot, cold or humid environments.
•
In areas susceptible to excessive dust and dirt.
•
Near any appliance that generates a strong magnetic field.
•
Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.
Warning!
•
Do not look into the projector's lens when the light is on. The bright may hurt your eyes.
•
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
•
Please do not open or disassemble the product as this may cause electric shock.
•
Turn on the projector first and then the signal sources.