Ambient Weather WR-111B ADVENTURER Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Cuaca Ambient Weather WR-111B ADVENTURER. Ambient Weather WR-111B ADVENTURER 15 halaman. Adventurer emergency solar hand crank radio
Juga untuk Ambient Weather WR-111B ADVENTURER: Panduan Pengguna (14 halaman)

Ambient Weather WR-111B ADVENTURER Panduan Pengguna
and 24 hour time mode. Press the MODE button to proceed to the next step.
2. Set Hour. Press the TUN+ or TUN- to adjust the hour up or down. Hold the TUN button to
change rapidly. Press the MODE button to proceed to the next step.
3. Set Minute. Press the TUN+ or TUN- to adjust the minute up or down. Hold the TUN button
to change rapidly. Press the MODE button to exit the time setting mode.

6.4 Radio Band Mode

NOTE: Radio reception is dramatically reduced when charging from USB. Disconnect USB power
when listening to the radio.
Press the POWER button to turn the radio on and transition from the time mode.
The radio will default to FM band (or the last radio band since power up). Press the MODE button to
change to the AM band. Press the MODE button to change to the Weather Band (WB). While
displaying the Weather Band, press and hold the MODE button for two seconds to change to Weather
Band Alert mode (the WB symbol will begin flashing).
Note: Radio interference will be present while charging the ADVENTURER.

6.4.1 AM/FM Radio Tuning

When the radio is turned on, press the TUN+ button to increase the frequency and press the TUN-
button to decrease the frequency.
To tune quickly, press and hold the TUN (+ or -) key for at least one second. When you let go, the
radio will automatically tune to next radio station with sufficient reception.

6.4.2 Weather Band Tuning

There are seven distinct weather channels. The frequencies are 162.400 MHz, 162.425 MHz, 162.450
MHz, 162.475 MHz, 162.500 MHz, 162.525 MHz and 162.550 MHz.
For a complete list of weather radio broadcasting stations, please visit the National Weather Service
website:
Our recommendation is to tune to the station with the best reception using the TUN+ button. You will
hear the "voice of the National Weather Service", and automated voice that provides forecast
information, weather statements, watches and warnings.

6.4.3 Weather Alert Mode

You can silence the radio and enter the alert mode. The radio will remain in standby mode until there
is a weather statement, watch or warning. To activate the Weather Alert Mode, tune to your local
station as defined in the previous section.
Press and hold the MODE button until the WB symbol begins flashing. The WB symbol will continue
to flash until there is a weather statement, watch or warning. In the event of an alert, the alert light
will flash and the radio will sound (with the voice of the National Weather Service). To disable the
alert light, press any key. To disable the alert light but continue in alert mode, press and hold the
MODE button to two seconds.
To verify you have reception in your area, the National Weather Service (NWS) normally run tests
each Wednesday between 10 a.m. and noon local time. Tests may occur at other days and times when
Version 2.11
www.nws.noaa.gov/nwr/indexnw.htm
©Copyright 2014, Ambient LLC. All Rights Reserved.
Page 8