ACR Electronics OLAS GUARDIAN Panduan Memulai Cepat - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Keamanan ACR Electronics OLAS GUARDIAN. ACR Electronics OLAS GUARDIAN 16 halaman.
Juga untuk ACR Electronics OLAS GUARDIAN: Pengujian (2 halaman), Pemecahan masalah (2 halaman)
Halaman Cetak
4. OLAS MOBILE APPLICATION FEATURES (AVAILABLE FROM HOME SCREEN)
•
Customise the OLAS transmitters name (press the unique number associated with the transmitter -
e.g. OLAS-Float On 1670 - then type the custom name)
•
Check OLAS tag battery status
•
Enable/Disable cut-off switch for individual OLAS transmitters
•
Enable/Disable OLAS transmitters
•
Pause all tracking
5. PAUSE TRACKING
•
Press the control switch for 2 seconds, release the control switch after a single beep
•
When in Paused state the control switch will flash green for 3 seconds ON/3 seconds OFF
followed by a sound signal
•
Press the control switch once to re-start Tracking
•
If an OLAS transmitter has been removed or switched off the Guardian will remain in Pause
6. ADDING AN OLAS TRANSMITTER (WITHOUT THE OLAS APP)
•
Press the control switch for 2 seconds, release after a single beep, Tracking will be Paused
•
Switch on the OLAS transmitter and hold it within 1 meter of the Guardian
•
Press the control switch once, the control switch will flash green for 10 seconds whilst scanning for
new transmitters
•
The number of connected OLAS transmitters is indicated with a sound signal and green flash per
transmitter
7. ADDING AN OLAS TRANSMITTER (WITH THE OLAS APP)
•
Switch on the OLAS transmitter and hold it within 1 meter of the Guardian
•
Open the home screen and press the + icon in the bottom corner, press "Scan for new transmitter"
•
The control switch will flash green for 10 seconds whilst scanning for new transmitters
•
The number of connected OLAS transmitters is indicated with a sound signal and green flash per
transmitter
•
The home screen will update with the newly connected transmitters
8. REMOVE AN OLAS TRANSMITTER
•
Press the control switch for 4 seconds, release after the second beep – this will switch off the Guardian
•
Switch off the OLAS transmitter/s to be removed. OLAS transmitter are turned off by pressing the
button on the transmitter for 4 secs. The light on the transmitter will then flash red.
•
Hold all remaining OLAS transmitters within 1 meter of the Guardian
•
Press the control switch to switch the Guardian ON
•
The Guardian will scan for 30 seconds while the control switch LED flashes green to indicate scanning
•
After 30 seconds, any OLAS transmitter within 1 meter of the Guardian will be tracked
•
The number of connected OLAS transmitters is indicated with a sound signal and green flash per transmitter
•
The control switch will illuminate green to indicate the Guardian is Tracking
11